General Information
EntryProx – Winner of Today’s Facility Manager Reader\’s Choice Award 2001
EntryProx provides single-door proximity access control for up to 2000 users. It is ideal for small installations or remote locations when used in conjunction with an online system, EntryProx can easily be switched to Wiegand output mode and connected to any OEM controller.
This Stand Alone Reader is compatible with all 26-bit HID proximity cards or keytags. It can also enroll most OEM or Corporate 1000 format cards and keytags up to 37-bits. This built-in keypad allows programming and PIN entry. EntryProx also features a detachable antenna module that can be mounted up to 10\’ away from the control unit. The attractive durable unit can be mounted indoors or outdoors.
Benefits
Designed for indoor and outdoor use, can be glass mounted
Offers optional use of a card, PIN code, or combination card and PIN
Transaction information includes time, date, user number and ID
Wiegand output mode for use with an access control panel
Features
Dimensions: 5.25″ x 2.75″ x 1.375″ (13.33 cm x 6.98 cm x 3.49 cm)
Power Supply:10 VDC to 15 VDC, reverse voltage protected linear supply recommended, 150 mA at 12 VDC
Relay Outputs: Strike Relay Form C, switches up to 4 A at 30 VDC AUX Relay Form C, switches up to 1 A at 30 VDC
Monitor Inputs: Door Position N.O. (normally open) dry contact Request to Exit N.O. (normally open) dry contact
LED: Bi-color red and green, amber, Infrared (used with optional hand-held printer-ENPROX-PRN)
Operation: Strike Time 1-99 seconds (adjustable)
Strike Mode Access Timer or Toggle/Latch
Door Ajar Time 10-990 Seconds (adjustable)
Operating Temperature: -22 to 150 F (-30 to 65 C)
Operating Humidity: 5% to 95% relative humidity non-condensing
Cable Distance: (Recommended cable is NC1861-BL-500, 6-conductor stranded with overall shield or equivalent)
Remote Reader Module 10\’ (3 m)
Wiegand Interface 500\’ (152 m)